Epoxy Flooring FAQ

Most residential garages take one to two days depending on the system, concrete condition and repairs needed. We confirm the schedule after seeing the floor.

Usually the old coating needs to be removed by grinding so the new system bonds to the concrete. We assess this during the estimate.

Flake systems are naturally textured, and anti-slip additives can be added to topcoats for extra grip when wet.

Both can work well. Polyaspartic topcoats are more UV stable and cure faster; epoxy base coats are excellent for build and adhesion. Many systems combine both.

Light foot traffic is usually possible within about a day; vehicle traffic typically waits several days depending on the products used. We give you exact cure times for your system.

Yes. Cracks and pits are filled and ground flush as part of preparation. Structural cracks can still telegraph through over time, and we explain that before work begins.

We assess the slab and can perform moisture testing where conditions suggest it, which is especially important on Florida ground-level slabs.

New concrete needs to cure before coating, commonly around 28 days. We will confirm readiness before scheduling.

A sealer is a thin protective layer; a coating builds a thicker, more durable surface with color and texture options.

Yes, using UV-stable products designed for exterior exposure rather than standard indoor epoxy.

Polyaspartic cures much faster than epoxy, and some garage projects can be completed in a single day. Prep needs and concrete condition still decide the schedule.

Aliphatic polyaspartic coatings are UV stable and resist yellowing far better than standard epoxy.

Yes. We bring sample boards so you can compare blends in your own lighting.

Sweep or dust-mop regularly and clean with a mild, pH-neutral cleaner.

It is durable, but high-gloss finishes show fine scratches over time. A urethane or polyaspartic topcoat improves wear resistance.

We can follow a color direction and style, but each metallic floor is hand-worked and will vary naturally.

We discuss scheduling during the estimate and try to accommodate off-hours or phased work when possible.

Often yes. Urethane or polyaspartic topcoats improve chemical and abrasion resistance for demanding areas.

Yes. Damaged joints and spalls are repaired with suitable fillers before coating.

Properly specified high-build systems are designed for wheeled traffic. We match thickness and topcoat to your loads.

We do not recommend standard epoxy for sun-exposed areas because it can amber and chalk. UV-stable products are better suited.

Lighter colors and textured finishes stay cooler. We help you choose options for your exposure.

Most sound concrete decks can be coated after repairs. Some pavers or failing overlays need different solutions, which we explain on site.

Texture and aggregate are built into the finish. No wet surface is slip-proof, but texture greatly improves grip.

Exterior-rated systems are chosen to resist hot-tire pickup. Product choice and prep are key, and we explain expected wear.

Pavers usually call for a paver sealer rather than a floor coating. We let you know what is suitable.

Look for surface preparation method, repairs, system type, number of coats, topcoat and cure times.

Yes. We serve Naples and nearby Southwest Florida communities listed on our service areas page.

We focus on concrete floor coatings, polishing and repair.

Call us or use the estimate form and we will arrange a visit.

It depends on the system and square footage. Fast-cure options can reduce downtime.

Color selections and simple layouts are possible; we discuss design options at the estimate.

Grinding gives a consistent profile and removes weak surface material and contaminants more reliably than etching.

We use grinders connected to dust extraction to keep dust down.

Polished concrete is generally not slippery when dry and clean; wet or contaminated floors can be slick, as with most hard floors.

Slab quality varies. Patches and old adhesive can show through, which we explain beforehand.

It varies by system, from thin-film coatings to high-build and self-leveling systems. We specify based on use.

A topcoat improves UV, abrasion and stain resistance, so we usually recommend one.

Under a coating, repairs are usually hidden. On bare or polished concrete they may remain visible.

Small areas can sometimes be patched, but widespread peeling usually means removal and a new system.

It depends on traffic; many floors benefit from periodic cleaning and occasional re-burnishing.

Epoxy is usually refreshed with a screen and recoat rather than polishing.

A UV-stable topcoat over a sound epoxy base can restore appearance.

We test adhesion and inspect for peeling during the estimate.

A mild, pH-neutral cleaner. Avoid citrus or acidic cleaners that can dull some finishes.

Ask during your estimate and we will discuss options for your property.